Available For
Sale
8,000
Tons Cane Per Day Grinding Capacity
Sugar Factory
(piecemeal)
CRUSHER
AND FOUR (4) MILLS
CRUSHER
- 84" X 40" WALKERS, 6 ROLL, DRIVE AND TRANSMISSION, AND
FOUR (4) MILLS, DRIVES AND TRANSMISSIONS - ONE (1) 84" AND
THREE (3) 66"
CENTRIFUGALS
TWO (2) WESTERN STATES 48" X 36" - AUTOMATIC BATCH
CENTRIFUGALS
ONE (1) BROADBENT 54" X 48" - AUTOMATIC BATCH CENTRIFUGAL
THREE (3) WESTERN STATES CC-5 - CONTINUOUS CENTRIFUGALS
ONE (1) WESTERN STATES CC-6 - CONTINUOUS CENTRIFUGAL
BOILERS
THREE (3) 100,000 POUNDS OF STEAM PER HOUR BOILERS, STOKER TYPE
FIVE (5) 40,000 POUNDS OF STEAM PER HOUR BOILERS, STOKER TYPE
ROTARY VACUUM FILTERS
ONE (1) 10' X 14' EIMCO ROTARY VACUUM FILTER
EVAPORATORS
25,000 SQ. FT. HEATING SURFACE PRE-EVAPORATOR
17,000 SQ. FT. HEATING SURFACE
B&M (ALLEN) STANDARD VERTICAL QUADRUPLE-EFFECT EVAPORATOR
27,913 SQ. FT. HEATING SURFACE TRIPLE-EFFECT EVAPORATOR
47,748 SQ. FT. HEATING SURFACE
ST. MARY IRON WORKS QUADRUPLE-EFFECT EVAPORATOR
JUICE HEATERS
TWO (2) 700 SQ. FT. HEATING SURFACE SQUIER JUICE HEATERS
ONE (1) 1,200 SQ. FT. HEATING SURFACE NADLER JUICE HEATER
ONE (1) 2,100 SQ. FT. HEATING SURFACE ST. MARY IRON WORKS JUICE
HEATER
TWO (2) 5,000 SQ. FT. HEATING SURFACE SUPERIOR AND SMI JUICE
HEATERS
VACUUM PANS
THREE (3) 1,200 CUBIC FT. STEARNS-ROGER VACUUM PANS
TWO (2) 1,200 CUBIC FT. ST. MARY IRON WORKS AND J&L
VACUUM PANS
ONE (1) 3,000 CUBIC FT. HONIRON VACUUM PAN
SUGAR CANE MILL TANDEM
MILLS, DRIVES AND TRANSMISSIONS
Crusher:
Fulton, 39” X 81” WITH 17½ x 22”
journals, TWO (2) ROLL crusher
Transmission (Crusher):
One (1) Lufkin Enclosed
High Speed Gear Reducer, Model
Number: NM106C,
Service Rating: 500
HP, Input Speed: 4400 RPM,
Ratio: 3.827:1, Service
Factor: 1.82.
One (1) Lufkin Enclosed
Intermediate Speed Gear Reducer, Model Number:
D640C, Service Rating: 500
HP, Input Speed: 1150 RPM,
Ratio: 13.7:1, Service Factor:
1.7.
One
(1) Intermediate Gear with 63 tooth, 16" face width, and
One (1)
Intermediate Pinion Gear with 19 tooth, 19" face width, and
One (1)
Open Gear (final drive) with 67 tooth, 19" face width, Spur
Gear.
First and second mills:
Diebert, Bancroft & Ross, 38” x 78” with 18” x 22” journals four (4)
roll mills (2)
Drive:
The first and second mills common turbine drive has
been sold.
Transmission:
One (1) Farrell
High Speed Gear
Reducer, Model Number: SI 2410, service Rating: 900-1050
HP, Speed: 4000-4200 RPM,
Ratio: 6.024:1.
TWO (2) Intermediate GearS: one (1) with 66 tooth, 14" face width and one (1) with
68 tooth, 14" face width, and
TWO
(2) Intermediate PinionS: one
(1) with 19 tooth, 19" face width and one (1) with 18 tooth, 19½"
face width.
TWO
(2) Open GearS (final driveS): one
(1) with 67 tooth, 19" face width, Spur
Gear-67T450 Bancroft and one (1) with 68 tooth, 19" face width Spur
Gear.
third and fourth mills:
Diebert, Bancroft & Ross, 38” x 78” with 18” x 21” journals four (4)
roll mills (2)
Drive: The third and fourth mills common turbine drive has
been sold.
Transmission:
One
(1) Intermediate Gear with 63 tooth, 16" face width.
One
(1) Intermediate Pinion Gear with 19 tooth, 19" face width.
One
(1) Open Gear with 67 tooth, 19" face width, Spur
Gear.
note:
the transmission applicable to mill #3 has been sold.
66” MILL:
Service Foundry, 36” x 66” with 18” x 23” journals four (4) roll MILLs
Drive:
One (1) 600 HP Terry Turbine, Inlet Steam
Pressure: 150 PSIG, with a
Temperature of 366°F, Exhaust Pressure:
15 PSIG, Speed: 4500
RPM.
Transmission:
One (1) Farrell Herringbone High Speed Gear
Reducer --Rebuilt by Lufkin in 1996.
600 HP, Ratio: 6.97:1, RPM: 4485
to 643, Service Factor: 2.0.
One (1) Farrell Herringbone Low Speed Gear
Reducer, Size: SRH2616, 300
HP, Ratio: 5.458:1, RPM: 500 to 91.6.
One (1) Final Drive, Service Foundry.
|
